BATHS – “ultrasonic” – “ with sweep & degass & pulse functions”

• New generation ultrasonic cleaners are features with “sweep”, “degass” ve “pulse” functions. Most technical specifications are similar with classical ultrasonic cleaners:

sweep function

• The transducer system provides a sweep cycle from 37 kHz to 34 kHz and back to 37 kHz enabling a homogeneous field distribution.
• Offers faster cleaning with improved cavitation, increased distribution of ultrasonic energy, facilitate the ultrasonic wave crossing through the mesh wire basket for more effective cleaning.

degas function

• Accelerates the removal of gas contained in cleaning solutions by pulsing short breaks in the ultrasonic cycle which allows coalesced gas bubbles to rise to the surface and burst. Guarantees effective cleaning since the ultrasonic waves can pass more freely through liquid.

pulse function

• Activates the power so that power increases by approximately 20 % and guarantees inforcement of the peak performance. Provides faster cleaning with improved cavitation, increased distribution of ultrasonic energy eliminating the standing waves, facilitate the ultrasonic wave crossing through the mesh wire basket.

what does degass means

• Ultrasonic cleaning is accomplished by the energy released from the violent collapse of tiny vacuum- filled bubbles. Air bubbles and dissolved air in the freshly filled cleaning liquid absorb ultrasonic energy and significantly reduce the cleaning performance. A degas mode accelerates the removal of gas contained in cleaning solutions by pulsing short breaks in the ultrasonic cycle which allows coalesced gas bubbles to rise to the surface and burst. Degass function allows the ultrasonic cleaner to work much more effectively, since the ultrasonic waves can pass more freely through liquid.

how to degass an ultrasonic bath

• Before the start of each working day it is best to degas the liquid in your ultrasonic cleaner tank. Fill the tank to the limit and add a spoon of cleaning detergent which helps to soften the water and assists degass process. Set heater thermostat to 60°C. After temperature is achieved run unit on cleaning cycle for about 10 minutes. Degassing will expel the air so that the unit operates with optimum performance and effectiveness. It is advised to degass your cleaner whenever you fill the tank with fresh water.